I have a PW3 and just installed a WallBox Pulsar Plus for my Kia EV6.
But the WallBox is on separate 50Amp breaker on the Main Panel - outside of the PW3 (since my installer was not confident of hooking up to the inverter). Nor is it hooked up to any Power Sensors (since we dont have any additional)
Now to use excess solar control - will ChargeHQ need the monitoring on the consumption of the EVSE as well? or it can be configured to just be reliant on output to the grid ignoring the EVSE?
Charge HQ supports having the EV charger “outside” the solar & battery monitoring. You need to enable the Consumption Excludes Charging setting. See Consumption Excludes Charging setting
